Dropping your cherished bike can be an expensive exercise. R&G Adventure Bars offer the rider peace of mind, providing essential crash protection for your motorcycle.
Made from 22mm gauge steel tubing, powder coated for a strong and superbly finished...
Bar End Sliders
These bar-end protectors are made from steel and high-density nylon which are a direct replacement of the original manufactured item.
Should you drop or crash your bike, the end of your bar is likely to be scraped,
With the INTACT battery guard and the free App for Apple (Iphone 4S and newer) or Android (4.3 or higher), you can easily check the voltage via bluetooth.
Works with any vehicle battery (6V / 12V / 24V).
Unmounting or physical access to the battery...
Bundle pack includes 1 x Chain Monkey and 1 x Laser Monkey
Chain Monkey quickly and easily sets correct chain tension
Laser Monkey aligns your wheel and sprocket
Ideal for new riders through to experienced mechanics
Correct tension first time, every time.Chain Monkey is the world’s first tool designed to help you set the tension on your vehicle’s drive chain. The task of tensioning a chain can be a tedious and time consuming task, especially on motorcycles. But not...
Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake calipers during a crash or drop.
Sold as a pair
Designed to protect your bike from debris thrown up by the front tyre. The extenda fender helps keep rider and bike cleaner, cuts down on paint damage on the lower fairing and also protects important parts of the bike such as the radiator and oil...
Logo Decal Sticker
Size: 130 mm x 15mm ( 5" x 0.5" )
Supplied in Red and Yellow on a Black backing
FREE SHIPPING ON THIS ITEM.
Never forget your sidestand puck again! Kickstand shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite...
OPTION 1: Small 130ml
OPTION 2: Large 300ml
Liquid Film Protector/Cleaner
Suitable for all surfaces
Cleans, Protects, Revives
UV resistant protection
Heat Resistant – use on engine parts and chrome
Arrow clear lens mini indicators **BEST SELLING**
Front or Rear fitting indicator.
Rubber Stem mounted so they don't snap easy, and don't blow bulbs due to vibrations.
Fitted with 12v 23w Amber Bulbs
These indicators will flash at the correct rate...
Tirox Snapjack v2- whether you're at home or on the road. Snapjack is an easy to use portable jack for lubing, cleaning & adjusting your drive chain.
For use on most modern sport, sport touring, superbike, dual-sport, adventure, standard and entry level...
A 30cm sport screen option made from acrylic
Includes fitting kit
Image shows Light Black (Dark Smoke) option
Venture Shield Paint Protection Film will ensure that your machine's bodywork remains free from stone chips and cracks.
In the kit:
300mm x 300mm square of venture shield ( 12"x12" )
Shipped in a tube for...
They are made from pressed aluminium and feature a neat, seamless frame (where applicable).
They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
No permanent modifications need to be...
Black Universal Splash Plate.
A simple solution to reducing the amount of water/mud spray thrown up by the rear wheel of the motorcycle.
NUMBERPLATE/LICENSE PLATE NOT INCLUDED
Are they cotton reels or swingarm protectors? Well, they are both really!!
R&G Offset Cotton Reels protect the swingarm and core swingarm components from damage in the event of a crash, slide or drop. Doubling up as paddock stand bobbins too, they allow...
These swingarm protectors fit to either end of the rear wheel spindle. The expanding design that holds them in place means installation is a breeze taking only minutes. They help keep core components found on and around the swingarm area such as the...
These spindle sliders mount directly to the rear spindle,
Their expanding design allows for easy installation into each side of the swingarm spindle hollow, protecting the swingarm and swingarm components (like the brakes and drivetrain) in the event of...
Tyre Pressure Monitoring System
2x sensors and 1x Display
OPTION:1 DIY System
Screw on Sensor TP90
The system comes with 2 screw on sensors and a visual display that shows in real time the current tyre pressures of both tyres in PSI/Bar format...
MICHELIN Tyre Pressure Monitoring System for Motorbikes (MICHTPMS1)
The wireless system does not need any programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and...
Use this item to charge iPhone, iPad, iPod, GPS, Camera or any Smartphone or device that be charged via USB
Designed for use on any 12v battery
Input: 12v DC Max
Output: 5v DC / 2.1A
Simply plug it in to the quick disconnect SAE battery harness that...
1pc construction wheel chock provides excellent stability of motorcycles in storage or transit
• 38mm tubular steel construction• Steel base-plate for front wheel location features 2 side-plates to grip front wheel• Side-plates are lockable and width...
This Wheel Brace/Grab has been designed to hold the bike upright using the front wheel, which is idea in cramped environments.
Simply wheel the bike into the Wheel Brace and the pivot place holds the bike firmy in position.
The Wheel Brace is a great...